BH Painting Metro Detroit · Metro Detroit painting Sun–Fri service All of Metro DetroitCabinets
Cabinet Painting
A refined cabinet finish without the cost and disruption of full replacement.
Is your cabinets project in our service area?
Location access only checks whether you appear to be within our Metro Detroit coverage bounds. It does not promise project availability, a start date, or an arrival time.
What's included
Cabinet painting across Metro Detroit gives sound kitchen, bathroom, or built-in cabinetry a durable new look in Oakland, Wayne, and Macomb County. Our controlled preparation and coating process includes labeling, careful removal, degreasing, sanding, bonding primer, finish application, and organized reassembly.
We discuss surface preparation, adjacent-area protection, products, colors, coats, access, and cleanup before work begins. Insurance information is available on request.
Service area
Cabinets service across Metro Detroit
Painting service across Wayne, Oakland & Macomb counties during posted business hours.
More about cabinets in Metro Detroit
Cabinet painting across Metro Detroit gives sound kitchen, bathroom, or built-in cabinetry a durable new look in Oakland, Wayne, and Macomb County. Our controlled preparation and coating process includes labeling, careful removal, degreasing, sanding, bonding primer, finish application, and organized reassembly. For each cabinets request, BH Painting Metro Detroit considers the substrate, preparation, property use, desired appearance, access, and cleanup requirements before finalizing scope.
We serve all of Metro Detroit for cabinets — Detroit, Dearborn, Warren, Sterling Heights, Troy, Livonia, Royal Oak, Farmington Hills, Pontiac, Southfield, Westland, Taylor, and every city in our coverage map. Project dates are discussed after we understand the scope and current schedule.
Pricing for cabinets depends on the included surfaces, preparation, product selection, access, protection, and timing. The estimate should identify assumptions and exclusions; proposed scope changes should be discussed and documented before added work proceeds.
We document the agreed preparation, primer where needed, paint products, colors, sheen, surfaces, and closeout expectations so everyone is working from the same finish plan.
Why a cabinet finish fails, and the preparation that decides it
Cabinet doors take more hand contact than any other painted surface in a house, and a cabinet finish that lets go almost always let go at the first step rather than the last. Doors and the rails around a range carry cooking grease that a damp cloth spreads rather than removes, so degreasing with a dedicated cleaner comes before any sanding: sanding a greasy door drives the contamination down into the scratch pattern where no primer will reach it. Factory cabinetry is usually finished in a catalyzed conversion varnish that is harder and slicker than anything a coating will key into on its own, so the existing sheen is cut back mechanically first. The substrate then chooses the primer. Slick factory finishes, thermofoil, and melamine want a bonding or shellac-based primer; knots, and the tannin in oak and maple, want a stain-blocking primer or they will bleed amber through a light color months later. Red and white oak fill a great many Metro Detroit kitchens built between the seventies and the nineties, and their open grain telegraphs through paint unless it is grain-filled or left visible as a decision rather than an accident. Finish coats are cabinet-grade, waterborne alkyd or a two-component urethane, because a wall paint on a door edge marks with a fingernail.
Kitchens, baths, laundry rooms, and built-ins in an occupied house
A cabinet job is a logistics problem wrapped around a coatings problem. Doors, drawer fronts, and their hardware are labeled to the opening they came from before anything is removed, because face frames are rarely square across a twenty-year-old kitchen and a door that swaps position stops closing flush. Doors and drawer fronts are finished off the cabinet and laid flat, where the film can level without running at the edges; the boxes and face frames stay where they are and are finished in the room behind containment, with the range, counters, and floor protected and the openings masked. Hinges and pulls are either cleaned and refitted to their original holes or replaced, and new hardware on a different hole spacing is a decision to make before the doors come off rather than after. While the doors are curing the cabinets are open shelving, so the room stays usable and cupboards are emptied at the start rather than halfway through. Reassembly is where the labeling pays for itself: doors go back to their own openings, hinges are adjusted so the reveals line up across a run, and bumpers are refitted so a fresh finish is not closing wood onto wood.
Cabinet work is the Michigan indoor season
Exterior painting in this climate closes with the first sustained cold, and cabinets and interiors are what carry a Michigan winter, which makes early autumn the sensible time to plan a kitchen rather than the middle of one. Indoors the governing constraint changes: cure sets the schedule, not dry time, and a cabinet-grade finish that is dry to the touch within the hour can still need days to reach the hardness where a door will not print against its stop. A house closed up for the season runs warmer and drier than it does in July, which helps the film harden, but it also means ventilation has to be arranged deliberately rather than by opening a window, so low-odor waterborne products do more work here than they do in an open house. Humidity from a running dishwasher or a bathroom fan matters more at this point than the outdoor temperature does. Doors go back on their openings once they can be handled without marking rather than on a date fixed before the work started. The kitchens, baths, laundry rooms, and built-ins this applies to run right across the Oakland, Wayne, and Macomb county area we cover: Royal Oak, Farmington Hills, Southfield, Sterling Heights, Rochester Hills, Livonia, Dearborn, and Detroit itself.
In depth
Questions about cabinets across Metro Detroit
Practical answers from BH Painting Metro Detroit to help you compare painting scopes in Metro Detroit. Tap a question to expand.
Preparation depends on the surface and its condition. A clear scope may include washing, scraping loose coating, sanding glossy areas, filling minor holes, caulking selected gaps, and protecting adjacent finishes. Existing damage or repairs outside the painting scope should be identified before work begins.
Primer is commonly used on bare or repaired surfaces, difficult stains, major color changes, and areas where adhesion needs help. A previously painted surface in sound condition may only need spot primer. The written scope should identify where primer is planned and why.
Flat and matte finishes reduce reflection but can be less washable. Eggshell and satin add washability and highlight more surface variation. Semi-gloss is often considered for trim, doors, and moisture-prone areas. Product-specific performance matters, so sheen should be selected with the room and substrate in mind.
Coat count depends on the existing color, new color, paint product, application method, and surface porosity. Strong color changes may require primer or additional finish coats. We recommend defining the planned coating system and the expected finished appearance instead of relying on a blanket promise.
Review a physical sample in the actual room or exterior area at different times of day. Light, surrounding finishes, and sheen all affect perception. Record the manufacturer, color name, color number, product, and sheen before materials are ordered.
Temperature, surface moisture, rain, wind, and direct sun can change application and drying conditions. Exterior dates may move when conditions fall outside the selected product's requirements. A responsible schedule protects the coating system instead of promising work in unsuitable weather.
The closeout plan should cover removal of masking and project debris, orderly storage or removal of labeled touch-up paint, and a walkthrough against the written scope. Any agreed touch-ups should be documented before the project is considered complete. Call (313) 236-4558 to discuss your project in Metro Detroit.
Planning a cabinets project?
Tell BH Painting Metro Detroit about the surfaces and finish you have in mind.